waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and resources > Aquamist HFS-6 forum

Reply
 
Thread Tools Display Modes
  #1  
Old 24-01-2015, 11:28 PM
edstone83 edstone83 is offline
Junior Member
 
Join Date: Jul 2012
Location: Beaufort, S.C.
Posts: 1
Default FMC Flow Meter Inop

My gauge shows no flow in test mode but both my ports spray how they should. Car sat for 6 months waiting on the transmisson. I took the flow meter out and blew through which you could hear and feel the turbine inside spinning. I'm assuming that it's bad and wondering if anyone has experienced this before.
Reply With Quote
  #2  
Old 11-02-2015, 11:40 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,916
Default Re: FMC Flow Meter Inop

Can you send the FCM back to me for checking? We still have a few spares for this item but not a completely module. Do not cut short of any wire attached to it.
__________________
Richard L
aquamist technical support
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 01:06 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.