waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and resources > Aquamist HFS-6 forum

Reply
 
Thread Tools Display Modes
  #1  
Old 03-05-2015, 03:48 AM
johnmx3ze johnmx3ze is offline
Junior Member
 
Join Date: Mar 2015
Location: ontario canada
Posts: 1
Default hfs-6 in 09 wrx problems

hi guys, first post in here...

i just installed a new hfs-6 kit on my built 09 wrx, im pretty sure everything is hooked up right but heres my problem...

1st i put water in the tank until level sensor was fully up then i turned key to on position and the yellow led light up for 10 secs and then turned off and no other leds lighted up... all lights on control box were green, then i tryed testing the pump with the prk jumper on the test link and turned key on and the pump started after 10 secs and water came out of the hose so then i turned it off and put jumper back on prk... but now everytime i put the key to the on position it sprays :/

not sure what im doing wrong so any help would be appreciated

if someone could walk me through the first test to do, thanks
Reply With Quote
  #2  
Old 17-05-2015, 05:44 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,916
Default Re: hfs-6 in 09 wrx problems

Remove the green wire of the yellow harness from the fuel injector(-), tell me what happen.
__________________
Richard L
aquamist technical support
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 11:13 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.