![]() |
#1
|
|||
|
|||
![]()
Hi folks
we have a highly tuned R53 Mini which is using the c30-94 Rotrex going straight into a Garrett IC core ( sized for 400BHP ) . It has stronger internals bla bla bla with coolers for oil , two in line water thermostats , radiator with two pull fans and plenty of ducting to it ( boot mounted ) Now we would like to spray 100% water pre Rotrex and I believe from calculations i'd need a 0.7mm jet trimmed down slightly . Is there any advice on the use of the 'ring' that allows the injector to mount in the intake to the Rotrex -- as to distance away etc We havent bought a system but it WILL be the HS3 Thanks for any advice and here's a link to our build thread which is nearing completion ![]() http://www.minitorque.com/forum/f743...tml#post360343 |
|
|