waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-3 forum

Reply
 
Thread Tools Display Modes
  #1  
Old 30-06-2017, 01:59 AM
Redline99 Redline99 is offline
Junior Member
 
Join Date: Jun 2017
Location: Calgary canada
Posts: 1
Default Hfs3 wiring to vipec v88 and jet for jdm supra 97

Hello,

Currently installing this kit on my 97 jdm supra rz 6spd tt, is the jdm supra harness different than the usdm harness pinout? As I'm finding it tricky to find a jdm wiring schematic, I'm running the Vipec V88.

Could someone possibly help me out and inform me on which pins to tap into for the ecu wires required?
- Inj. (+) or ign. Pre crank
- Inj. (-)
- map sensor
- assuming I won't require the auxillary wired in?

Also, reccomendation on jet size? I have 1000cc Injectors, bw366, will be looking to run 25psi +.

Any help is greatly appreciated!! Thankyou
Reply With Quote
  #2  
Old 02-07-2017, 12:22 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Hfs3 wiring to vipec v88 and jet for jdm supra 97

No other wires are needed.
__________________
Richard L
aquamist technical support
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 06:46 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.