waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-4 forum > HFS-4 user manual and wiring diagrams

Reply
 
Thread Tools Display Modes
  #1  
Old 17-03-2012, 09:52 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Mazdaspeed 6 (update: 1st August 2015 ) SN #12751 on onwards





===================



===================



===================



===================



__________________
Richard L
aquamist technical support
Reply With Quote
  #2  
Old 18-03-2012, 03:11 AM
Dust Dust is offline
Senior Member
 
Join Date: Mar 2007
Location: Frankfort, Kentucky
Posts: 227
Default Re: Mazdaspeed 6

Any idea if it will be similar or the same for the MS3?
Reply With Quote
  #3  
Old 18-03-2012, 04:15 AM
Dust Dust is offline
Senior Member
 
Join Date: Mar 2007
Location: Frankfort, Kentucky
Posts: 227
Default Re: Mazdaspeed 6

http://www.mazdas247.com/forum/showt...-Function-List

ECU and other stuff for the MS3 gen1
Reply With Quote
  #4  
Old 18-03-2012, 10:02 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Mazdaspeed 6

Thanks for the link, I am working on all the drawings this week, it will be posted by soon.

Richard
__________________
Richard L
aquamist technical support
Reply With Quote
  #5  
Old 12-04-2012, 05:04 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Mazdaspeed 6 (update) SN #12091 onwards

The H4 controller has been updated (see serial number). It is no longer necessary to perform one of the under-board modification any more, see old diagram.

For those who has the older version, please contact me for exchange of configuration upgrade. No charge.
__________________
Richard L
aquamist technical support
Reply With Quote
  #6  
Old 15-04-2012, 11:52 PM
silversport silversport is offline
Junior Member
 
Join Date: Apr 2012
Location: Texas
Posts: 4
Default Re: Mazdaspeed 6 (update) SN #12091 onwards

Hi Richard,
I came here from the Mazda Speed forums;
I own a 2006 MS6 GT. I am in Houston Texas and want to purchase a kit for this car; it does not have major mods, that is a, SRI, a high flow cat, a balance shaft delete and the Hyper tech tune.
What exactly I need to purchase;
Regards;
silversport
Reply With Quote
  #7  
Old 16-04-2012, 08:55 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Mazdaspeed 6 (update) SN #12091 onwards

As far as the water injection system is concerned, you just need a water tank. The HFS-4 has everything for your car.

What is your plan on tuning and power at present?

Richard
__________________
Richard L
aquamist technical support
Reply With Quote
  #8  
Old 16-04-2012, 03:43 PM
silversport silversport is offline
Junior Member
 
Join Date: Apr 2012
Location: Texas
Posts: 4
Default Re: Mazdaspeed 6 (update) SN #12091 onwards

I plan to stay as it is at this point; but we do have long hot hummid summers here; thus far let just said I like to keep things clean and cool internally in this car; it has 29K, so the engine still petty tight allthoug I don't granny the car when I by myself,
Thanks,
ss
Reply With Quote
  #9  
Old 16-04-2012, 05:47 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Mazdaspeed 6 (update) SN #12091 onwards

The system probably quite suitable for your application. It will mirror the fuel flow at any ratio. The consumption is quite low if you just want to keep things cool and minimise carbon build up on the inlet valve.

The system gives excellent atomisation from low to high flow due to its constant line pressure design. The dynamic range is very wide.
__________________
Richard L
aquamist technical support
Reply With Quote
  #10  
Old 27-04-2012, 07:55 PM
silversport silversport is offline
Junior Member
 
Join Date: Apr 2012
Location: Texas
Posts: 4
Default Re: Mazdaspeed 6 (update) SN #12091 onwards

Aqua mist HFS-2 Injection System
Can I run this system on my ms6; I want to go with something solid and upgrade later; if I can list the size nozzle and the tap tool I need; I plan to just run my own tank (windshield washer tank) for now and do away with a truck set up in the near.

SilverSport,
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 07:57 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.