|
|
#1
02-03-2009, 07:36 PM
|
|||
|
|||
PN# for flow restrictors/connecters.
Hi,
Just purchased a used HFS-5 system with DDS3 V10, only used one month. I'm one lucky guy! I went over the kit and found that its missing some unique parts that I can't find part numbers for. Can someone help me obtain these? 1-In line restrictors for HSV, the parts list claims it came with three. 2-The HSV retaining clip. 3-The connector and terminals for the water level sensor. [two pole] I'm still in the process of learning this systems ability and features. Question: Is the injecter pulse signal all that is needed for the system to work correctly. Not spraying until boosted? Installing in OBDII fuel injected turbo engine. Thank You. 
|
|
#2
02-03-2009, 11:52 PM
|
|||
|
|||
|
You are one lucky people for sure. Dud he gave the reason why he was selling the kit?
If you like to download HFS-5 v10 user manual, you can use the following link: Call Jeff at Howerton Engineering, he should be able to help you out, he should have Aquamist spares. Jeff Howerton Howerton Engineering 707.685.6279 Answer to your question: you need injector pulse signal signal for sure. The system can be set to trigger by boost or IDC%. Read the user manual, it is all in there. Richard
__________________
Richard L aquamist technical support
|
|
#3
03-03-2009, 12:04 AM
|
|||
|
|||
|
He sold the kit because he has a child on the way......wife made him :twisted:
I have been in contact with Jeff......Very helpful and we got it handled!! Thanks for the reply!.
|
 |
|
|
Linear Mode
