waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-4 forum > HFS-4 user manual and wiring diagrams

Reply
 
Thread Tools Display Modes
  #21  
Old 15-01-2013, 04:39 PM
brightside brightside is offline
Junior Member
 
Join Date: Oct 2011
Location: toronto
Posts: 23
Default Re: BMW Mini-R56 USDM wiring

It that a typo on the website? Just from the scale of things it does look to be 3/8 BSP.
Reply With Quote
  #22  
Old 15-01-2013, 07:13 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: BMW Mini-R56 USDM wiring

All the aquamist HFS-xxx pump with 3/8BSP-M to 1/8BSP-F adaptor as standard.

Adding this fitting will make the joint very flexible.
__________________
Richard L
aquamist technical support
Reply With Quote
  #23  
Old 17-01-2013, 04:08 AM
brightside brightside is offline
Junior Member
 
Join Date: Oct 2011
Location: toronto
Posts: 23
Default Re: BMW Mini-R56 USDM wiring

Ah, ok. This is what happens when you take 8 months to complete the install.

Should i order from you or Jeff?

i'll also start a thread about my install. Waiting for my gauge mount also now.
Reply With Quote
  #24  
Old 17-01-2013, 08:48 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: BMW Mini-R56 USDM wiring

It is completely up to you. If you have been dealing with Jeff before, you can continue. I am here for your technical support regardless.
__________________
Richard L
aquamist technical support
Reply With Quote
  #25  
Old 24-03-2013, 04:25 PM
hor_fun hor_fun is offline
Junior Member
 
Join Date: Jul 2011
Location: hk
Posts: 1
Default Re: BMW Mini-R56 USDM wiring

Hi richard

Any updates for n18 to use hfs4 or hfs3?

Wanting to use your products on my mini.


Quote:
Originally Posted by Richard L View Post
I looked into this briefly. The N18 DME is still made by Siemens I cannot verify the the pin out compatibility.

N14 Engine - N14B16AC (171hp / 177 ft-lbs)
* infinitely variable single VANOS (intake only)
* Siemens DME MED17.2 engine management

N18 Engine - N18B16M0 (181hp / 191 ft-lbs)
* infinitely variable double VANOS
* map-controlled oil pump
* variable valve timing (Valvetronic) with 3-phase servomotor and integrated eccentric shaft sensor
* composite camshaft construction
* new piston design
* Siemens DME MEVD17.2.2
Reply With Quote
  #26  
Old 25-03-2013, 11:39 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: BMW Mini-R56 USDM wiring

Both H3 and H4 will work on the new mini. I just don't have the DME pin out details to make a drawing.

I believe they will be the same.
__________________
Richard L
aquamist technical support
Reply With Quote
  #27  
Old 12-04-2013, 03:25 AM
Diego9 Diego9 is offline
Junior Member
 
Join Date: Feb 2013
Location: Mexico City
Posts: 1
Default Re: BMW Mini-R56 USDM wiring

I just have it installed in a GP2, so it will work in N18 engines. Now I need to learn how to set it up and read the gauge.
Reply With Quote
  #28  
Old 12-04-2013, 07:37 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: BMW Mini-R56 USDM wiring

This is good news. I was unable to get the new mini DME pinout. Now I don't have to. Thanks for the update.
__________________
Richard L
aquamist technical support
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 05:23 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.