waterinjection.info  

Go Back   waterinjection.info > Injection Theory (what it is and what it does) > Avoiding Disaster

Reply
 
Thread Tools Display Modes
  #1  
Old 27-05-2014, 05:06 PM
HYDE16 HYDE16 is offline
Member
 
Join Date: May 2014
Location: Morris County, NJ
Posts: 47
Default Correct Check Valve Jet Reassembly

Hello everyone, long time lurker, first time poster. I have a fast question regarding my .4mm check valve jets...

-I converted my intake manifold jets to the 90 degree push lock fittings, before re-installing them I soaked them in warm water with alcohol to clean any debris from the first tank full of water methanol. In doing so, one of the CV jets came apart completely. Can you tell me if I have the correct reassembly orientation in the attached photo? Does anyone have a picture or diagram of the correct CV jet assembly I can reference? I want to make sure I have it re-assembled correctly as my software tune relies on equal flow rates.

-Can anyone tell me how to verify what flow rate these .4mm CV jets have? Are there different options for the flow rate within a .4mm CV jet (ie 90cc, 110cc, etc)? Is there a way to rebuild the jet to change the flow (add more flow) so I don?t need to buy all new jets?

Thank you everyone!







Reply With Quote
  #2  
Old 31-05-2014, 07:54 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Correct Check Valve Jet Reassembly

The flow of the jet is determined by two components

1. The depth of the groove on the internal spinner
2. The size of the orifice.

They need to be matched if optimum performance is required.
__________________
Richard L
aquamist technical support
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 06:32 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.