waterinjection.info  

Go Back   waterinjection.info > Injection Theory (what it is and what it does) > Avoiding Disaster

Reply
 
Thread Tools Display Modes
  #1  
Old 18-03-2017, 09:53 PM
jmlegacy jmlegacy is offline
Junior Member
 
Join Date: Mar 2015
Location: Jamaica
Posts: 12
Default Pump life. How long? I give up!

I noticed that these aquatec 5800 pumps can hold pressure quite easily when new. Give it a few weeks in your daily driver and it can no longer hold the pressure. Let me explain what I mean by "holding pressure"

When new, with a gauge connected where my solenoid would have been, If you turn on the car or pump and let it pressurize and then switch it off, you will notice that the pressure is still present on the line even though the pump has stopped running.

Do this after a few weeks and noticed that when the pump is shut off it no longer holds pressure as the fluid now starts to leak past the seals in the pump!

Eventually, the pump will not be able to run and maintain an appreciable pressure
Reply With Quote
  #2  
Old 18-03-2017, 11:26 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Pump life. How long? I give up!

Who is the water injection manufacturer of your system?
__________________
Richard L
aquamist technical support
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 04:37 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.