waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-3 forum

Reply
 
Thread Tools Display Modes
  #1  
Old 24-05-2017, 07:03 PM
rxheaven rxheaven is offline
Junior Member
 
Join Date: Jan 2012
Location: u.k.
Posts: 4
Default Mazda RX7 FD3S Series 8 Setup

Hi Guys,

Does anybody have a wiring diagram for a series 8 rx7. I have seen diagrams for the earlier 8 bit ecus but not the 16 bit. Also what should be the setting for on-board trimmers and advanced system configurations.

My engine spec is: stock port 13B-REW, GT35R Single Turbo, 1680cc secondary injectors, 550cc primary injectors, OEM map sensor and apexi pfc ecu.

I plan to run preturbo and .6 at the boost elbow.

Thanks.
Reply With Quote
  #2  
Old 26-05-2017, 07:53 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Mazda RX7 FD3S Series 8 Setup

I found this might be the right one?

__________________
Richard L
aquamist technical support
Reply With Quote
  #3  
Old 26-05-2017, 03:32 PM
rxheaven rxheaven is offline
Junior Member
 
Join Date: Jan 2012
Location: u.k.
Posts: 4
Default Re: Mazda RX7 FD3S Series 8 Setup

thats the one. Do you have the pins for the last right connector?
Reply With Quote
  #4  
Old 26-05-2017, 05:58 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Mazda RX7 FD3S Series 8 Setup

Re-pasted. Sorry. see above
__________________
Richard L
aquamist technical support
Reply With Quote
  #5  
Old 26-05-2017, 07:57 PM
rxheaven rxheaven is offline
Junior Member
 
Join Date: Jan 2012
Location: u.k.
Posts: 4
Default Re: Mazda RX7 FD3S Series 8 Setup

Great. So using the 8bit diagram. Would this be the correct wires?


Reply With Quote
  #6  
Old 26-05-2017, 08:28 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Mazda RX7 FD3S Series 8 Setup

All wires must go to the appropriate pins on the 16-bit ECU.
__________________
Richard L
aquamist technical support
Reply With Quote
Reply

Tags
fd3s, rx7

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 12:51 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.