waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist systems in details and latest offerings

Reply
 
Thread Tools Display Modes
  #11  
Old 30-07-2014, 04:35 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: New water tank system

Quote:
Originally Posted by Pit Viper View Post
I think it's a great solution. Considering the thinness, it also wouldn't take much modification to stack a few side-by-side if you needed added capacity.
This planned already but we have not solved the unequal height caused the protruding bolt head if a water pump is assembled below. There will be a height difference of ~2mm. May be the rounded bottom of the tank wall provides a perfect solution.

We will supply four double length acetal stand-offs and four longer bolts.

__________________
Richard L
aquamist technical support
Reply With Quote
  #12  
Old 30-07-2014, 05:25 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: New water tank system

Quote:

Richard, are the caps vented like the Howerton Engineering tanks are?
The cap has a label with instruction regarding venting. Cap is not vented from factory.
__________________
Richard L
aquamist technical support
Reply With Quote
  #13  
Old 01-08-2014, 07:30 PM
Dust Dust is offline
Senior Member
 
Join Date: Mar 2007
Location: Frankfort, Kentucky
Posts: 227
Default Re: New water tank system

From

http://www.aquamist-direct.com/806-6...-version-only/


The bracket is ergonomically designed to minimise installation time. Offering chassis floor or cross-rail mounting options. Four holes at the centre section of the bracket is intended for mounting an aquatec pump below.
Reply With Quote
  #14  
Old 01-08-2014, 09:42 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: New water tank system





Uses little space...

__________________
Richard L
aquamist technical support
Reply With Quote
  #15  
Old 03-08-2014, 07:17 AM
blue blue is offline
Junior Member
 
Join Date: Jun 2009
Posts: 28
Default Re: New water tank system

I'm thinking out loud here

Will need to check for space but thinking I could also use this as a buddy tank
For my existing howerton mini r53 boot install, perhaps mounting direct to the outside wall

Sound possible for a retro fit?
__________________
blue
Reply With Quote
  #16  
Old 03-08-2014, 08:11 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: New water tank system

Outside wall?

The tank is 13" x 13" x 2.6", check the side panel of the boot.

Here is a trial fit to a smart car:
__________________
Richard L
aquamist technical support
Reply With Quote
  #17  
Old 03-08-2014, 08:26 AM
blue blue is offline
Junior Member
 
Join Date: Jun 2009
Posts: 28
Default Re: New water tank system

http://howertonengineering.com/mini/

Using outside facing sheet metal as the fixing point.

The sloping seat back is the challenge on a r53

Will be a very tight fit,

Might work if on slight angle or offset say -10 degrees from vertical
__________________
blue
Reply With Quote
  #18  
Old 03-08-2014, 09:12 AM
blue blue is offline
Junior Member
 
Join Date: Jun 2009
Posts: 28
Default Re: New water tank system

I have emailed you and jeff some pics of my mock up
Will be better than a thousand words here
As was struggling to resize on iPad
__________________
blue
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 03:48 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.