waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-4 forum

Reply
 
Thread Tools Display Modes
  #1  
Old 05-07-2017, 02:04 AM
VeightTT VeightTT is offline
Junior Member
 
Join Date: Apr 2017
Location: Houston
Posts: 23
Default "B" Led coming on before spray starts

Hi Richard
The B led on the gauge has been coming on before the system starts to spray, the system sprays as normal once the threshold trigger is reached but because the B illuminates before the system triggers it trips the fail safe because the gauge is not seeing any flow. I have tried all settings from MPS,IDC, P/IR, all on/off etc.
If I turn the threshold all the way to the right (4pm) the B still lights up at the same point and stays lit, it is like the system is expecting to see flow at the same point regardless of settings, like I say once the threshold is reached it sprays as normal and works well but I am left without a fail safe at WL because I have to keep the WL pan pot basically turned off.
Any thoughts?

Cheers
Andrew
Reply With Quote
  #2  
Old 05-07-2017, 08:34 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: "B" Led coming on before spray starts

Failsafe needs calibrating. You can either:

1. set the THRES higher
2. set the WL lower (counter-clockwise)
__________________
Richard L
aquamist technical support
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 05:27 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.