waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-3 forum

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 21-04-2017, 03:46 PM
Arthurwiljami Arthurwiljami is offline
Member
 
Join Date: Oct 2011
Location: Finland
Posts: 36
Default Flow sensor testing

When doing a spray test should the bargraph lit up any leds during testing?
How well the flow sensor should flow when blowing air throuh it with my mouth? It is farely hard to blow but I do feel fibration and hear the sensor rotating. Is that OK? During flow test both jets are spraying fine so the system does flow.

Problem is I get failsafe on boost and can't get any leds lighting up in the gauge bargraph. I've tested different setups with onboard trimmer, thres, gain etc. and was wondering if the flow sensor is bad or not.

Last edited by Arthurwiljami; 21-04-2017 at 03:55 PM.
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 12:25 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.