waterinjection.info  

Go Back   waterinjection.info > Injection Theory (what it is and what it does) > Injection Mixtures

Reply
 
Thread Tools Display Modes
  #1  
Old 08-11-2004, 04:44 AM
AlanL AlanL is offline
Junior Member
 
Join Date: Nov 2004
Posts: 1
Default Newbie Here With Question About Water Injection

I have an Infiniti G35 Coupe Automatic with ATI Supercharger. Max boost hits around 8psi. Compression ratio is 10.3:1. I have some timing pulled and just about to finish tuning. Currently 370hp and 304 torqe.

I have installed a home made system and was wondering what your recommendations are.

What size nozel?
Isopropyl, Ethanol, or Methanol?
Percentages?
PSI of pump.
Is it better to go high pressure and smaller jet?

I am using a #6 aquamist nozzle and injecting before the throttle body.
I am using a boost switch which kicks in a 4psi. Two windshield washer pumps.

Also where can I find a selection of higher pressure pumps.

Thanks for helping a novice.

AlanL
my email address is AlanL1275@aol.com
Reply With Quote
  #2  
Old 10-11-2004, 02:22 AM
M3Turboca M3Turboca is offline
Junior Member
 
Join Date: Nov 2003
Posts: 8
Default

Alan don't use wind shield washer pumps they are not strong enough to atomize the water.

I think this is what the grand nation guys use.

http://www.northerntool.com/webapp/w...Id=9414&R=9414

Your other parts listed and setup seems fine. You may even can add back that timing.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 12:35 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.