waterinjection.info  

Go Back   waterinjection.info > Injection Theory (what it is and what it does) > Injection Mixtures

Reply
 
Thread Tools Display Modes
  #1  
Old 09-10-2007, 11:29 AM
cosator cosator is offline
Junior Member
 
Join Date: Apr 2004
Posts: 5
Default mixture for chargecooling

hi !

i want to use my 2d mainly for chargecooling as my intercooler might be a little bit to small for doing this job properly....

so what mixture (water/methanol) is best for chargecooling ?

thanks.


cosator
Reply With Quote
  #2  
Old 16-10-2007, 06:22 PM
cosator cosator is offline
Junior Member
 
Join Date: Apr 2004
Posts: 5
Default

really no one......????

(yes, i?ve already done a search........ :wink: )



cosator
Reply With Quote
  #3  
Old 16-10-2007, 09:47 PM
keithmac keithmac is offline
Senior Member
 
Join Date: Mar 2005
Location: York / UK
Posts: 151
Default

Well methanol evapourates quicker than water, but only absorbs half the heat. Methanol is a fuel so you`ll have to re-tune if you inject it.

Staring point for most people is a 50/50 water/methanol mix and go from there, what I`ve read on here is water is better as an anti detonant, but if you need to inject larger quantities it will "bog" the engine down.

Personally I run 75%meth 25% water at around 1.2l/min port injected and post turbo, this is on the high side and it took a bit of tuning to get it right.

Best bet is to experiment and see how you get on.
__________________
VW Mk2 Golf 16VG60 - Mitsubishi GTO TT
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 12:20 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.