waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-3 forum

Reply
 
Thread Tools Display Modes
  #11  
Old 19-04-2010, 11:22 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Please post installation pictures of the HFS-3 here




Gengo:

Amazing how well the gauge colours matches the instrument panal in the dark!
__________________
Richard L
aquamist technical support
Reply With Quote
  #12  
Old 19-04-2010, 11:31 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: SC'd BMW E-36

Quote:
Originally Posted by jmargo View Post
PVM mounted on an awesome plate that Howerton engineering fabbed up for me.



Jeff's 1.25 Gallon tank internally baffled.


Guage mounted.



More pictures as I finish up.
Super clean install! - keep them coming
__________________
Richard L
aquamist technical support
Reply With Quote
  #13  
Old 21-04-2010, 06:45 AM
EngineerX EngineerX is offline
Junior Member
 
Join Date: Jan 2010
Posts: 15
Default Re: Honda S2000

Quote:
Originally Posted by Richard L View Post
This is a serious tank mount. The buffer tank below is very sensible.


Thanks, I used a 3/4" polypropylene bulkhead fittings to couple the surge tank to the main tank. A "breather" tube from the top of the surge tank to the top of the main tank would make it better. But I tested the 3/4" fitting and it's large enough to allow free flow between the 2 tanks with only a very small amount of air trapped on the top of the surge tank. I was able to tighten the fitting enough so that it holds the surge tank very well. These fittings are quite sturdy.
I used stainless steel 306 for the brackets. I stood on top of the main tank and the brackets were just about to yield. I weigh 155 lbs (11.07 St)

http://www.atlantarainbarrels.com/bulkheadfittings.htm

Reply With Quote
  #14  
Old 09-05-2010, 10:38 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Please post installation pictures of the HFS-3 here

anymore updates?
__________________
Richard L
aquamist technical support
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 06:03 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.