waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist systems in details and latest offerings

Reply
 
Thread Tools Display Modes
  #211  
Old 08-06-2011, 01:06 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Rotary "Summer" Unit GB interest

All is well after a few mis-communications. I am looking forward to work with you on the install.
__________________
Richard L
aquamist technical support
Reply With Quote
  #212  
Old 30-07-2011, 10:05 AM
Rene Barfred Rene Barfred is offline
Junior Member
 
Join Date: Mar 2009
Posts: 17
Wink Re: Rotary "Summer" Unit GB interest

Quote:
Originally Posted by Richard L View Post
OK, I will explain this another way...

Lets say every 100BHP requires 550cc of fuel

1. Your pair of 550cc primary injectors at 50% DC will fuel up to 100BHP. If you do not require to injector water/methanol before 100BHP, then the summer is unecessasy. Just run off the secindary injector.

2. Your pair of 1600cc primary injectors at 50% DC will fuel you up to 290BHP. In this case, you do need the summer. I believe at thsi power level, wmi is require to raise your in-cylinder cooling capacity.
Hello Richard and all you rotaryheads ;o)

Quite a while back, I was one of the first to purchase the HFS-6 for my RX7 FD, I bought it with the summer, set to 550 ccm primary/850 ccm secondary by Richard, I allso talked to Richard by phone because he was interested in, how it all worked out on the rotary as he was in the beginning of the WI on rotaries, as time has gone I have still not managed to install my HFS-6 setup, but are very close now ;o) the only thing I am confused about now is the above statement, I am still running stock injectors (550 primary/850 secondary) and will not have to inject water/meth before 100 BHP, so as I understand of the above, I do NOT have to install the summer, but only have to hook the HFS-6 to the secondary injector ? my next question is, I will wire/splice it to my power FC ECU, to get the signal from the secondary injector, I am not totally sure what terminal/number/coulor on the power FC ECU the secondary injector is ? according to Richard (and what I can see) I would have to splice it into the terminal 2B, LG (4Z) and the wire coulor should be yellow with a blue stribe, right ? if I WILL have to splice in the summer to see my 550 ccm injectors, according to Richard (and what I can see) I would allso have to splice it into the terminal 2B, LG/B (4Y) my car is a 93 eurospec. lefthanddrive car. I am really looking forward to hear from you guys and hope you can help me out with this, thank's in advance !

Rene Barfred
DENMARK
Reply With Quote
  #213  
Old 13-08-2011, 07:24 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Rotary "Summer" Unit GB interest

Rene,

I missed this post, sorry.

1. You can run the HFS-6 without the summer as you are still on stock injectors.
2. I believe the second injetcors are light green, pin 4Z.
3. You were right on light green, pin 4Z.
4. What signal is on terminal 2B?

Richard
__________________
Richard L
aquamist technical support
Reply With Quote
  #214  
Old 04-09-2011, 12:09 AM
xIceHoundx xIceHoundx is offline
Junior Member
 
Join Date: Jun 2011
Location: Germany
Posts: 6
Default Re: Rotary "Summer" Unit GB interest

PM sent reguarded the desire to purchase a summer and HFS-6 system if available or HFS-3 system if the HFS-6 system wont be available for a long time again.
Reply With Quote
  #215  
Old 21-09-2011, 05:30 PM
jduani jduani is offline
Junior Member
 
Join Date: Sep 2011
Location: Philadelphia PA
Posts: 8
Default Re: Rotary "Summer" Unit GB interest

Hey Richard! Are these kits still for sale? If they are can I get a Summer and HFS 3 System? Please PM me or email me at jonnyduani@gmail.com

THANK YOU!
Reply With Quote
  #216  
Old 21-09-2011, 05:49 PM
xIceHoundx xIceHoundx is offline
Junior Member
 
Join Date: Jun 2011
Location: Germany
Posts: 6
Default Re: Rotary "Summer" Unit GB interest

Its prob easier if you just email him richard@aquamist.co.​uk
I just purchased an HFs3v2 system and RX7 summer from them a week or so ago hes very helpful over email
Reply With Quote
  #217  
Old 22-09-2011, 03:49 PM
jduani jduani is offline
Junior Member
 
Join Date: Sep 2011
Location: Philadelphia PA
Posts: 8
Default Re: Rotary "Summer" Unit GB interest

He just emailed me thanks!!!
Reply With Quote
  #218  
Old 26-03-2012, 10:24 PM
Supernaut Supernaut is offline
Junior Member
 
Join Date: Dec 2010
Location: NJ
Posts: 28
Default Re: Rotary "Summer" Unit GB interest

Hey guys,

Did Richard put out any info on how to adjust the summer for larger injector sizes? I remember Richard saying that it wasn't difficult to do but I have no idea on how to do it.
Reply With Quote
  #219  
Old 31-03-2012, 10:40 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Rotary "Summer" Unit GB interest

which summer version is this?
__________________
Richard L
aquamist technical support
Reply With Quote
  #220  
Old 09-04-2012, 09:40 PM
Supernaut Supernaut is offline
Junior Member
 
Join Date: Dec 2010
Location: NJ
Posts: 28
Default Re: Rotary "Summer" Unit GB interest

Quote:
Originally Posted by Richard L View Post
which summer version is this?
Sorry for the late reply. The one before this GB. I believe it is a v2.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 06:28 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.