|
#1
|
|||
|
|||
Re: Failsafe with HKS EVC 6
I am still on the first issue of the yellow led.
So, when you pulled the blue harness, the yellow led still on?
__________________
Richard L aquamist technical support |
#2
|
|||
|
|||
Re: Failsafe with HKS EVC 6
Quote:
Yes Richard ... Actually no matter what harness you plug or unplug that light never goes off .. And I think if the system starts with it on it will never spray ... |
#3
|
|||
|
|||
Re: Failsafe with HKS EVC 6
I just tried this Richard, I plugged in only the essentials .. Gauge, power and ecu, only with these 3 the gauge would come on ... White background is on with the yellow water level led, no other led is on, only the white background lettering ... Adding the blue plug with or without the sensor makes no change ... S led comes on with the wfs plug, ans the B with throttle ..
Have not yet tried it on the road, I stopped when I could not jump the pump manually from the box. In the manual it says if the DFS jumper is linked this light will stay on as reminder, since the base is broken could that cause some sort of link between the poles? What else would trigger this light so early? Suggestions? |
#4
|
|||
|
|||
Re: Failsafe with HKS EVC 6
Quote:
Please, please one thing at a time... Just to recap: Gauge ...... plugged in Molex power ...... plugged in ECU harness ....... plugged in With the above, gauge back light comes on, and the yellow led also comes on. Is this correct?
__________________
Richard L aquamist technical support |
#5
|
|||
|
|||
Re: Failsafe with HKS EVC 6
Yes ..........
|
#6
|
|||
|
|||
Re: Failsafe with HKS EVC 6
The plastic base on the PRK has nothing to do with the issue.
__________________
Richard L aquamist technical support |
#7
|
|||
|
|||
Re: Failsafe with HKS EVC 6
OK, thank you.
This cannot happen unless there are some damaged components. Can you take a hi-resolution picture of the underside of the circuit board. I like to see if there are signes of damage. BTW, do you have a digital multimeter?
__________________
Richard L aquamist technical support |
#8
|
|||
|
|||
Re: Failsafe with HKS EVC 6
Here is the picture
|
#9
|
|||
|
|||
Re: Failsafe with HKS EVC 6
Th One more picture of the whole board. The left side is missing.
__________________
Richard L aquamist technical support |
#10
|
|||
|
|||
Re: Failsafe with HKS EVC 6
Yes I do have a multimeter ..
Give me a minute to get the controller pics |
|
|