waterinjection.info  

Go Back   waterinjection.info > Injection Theory (what it is and what it does) > Avoiding Disaster

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 12-03-2011, 08:32 AM
ricekikr ricekikr is offline
Junior Member
 
Join Date: Jan 2011
Location: none
Posts: 13
Default Running Pure Meth - Use UEGO as failsafe?

AEM sells a gauge, which shows flow. They say its useful because blockage occurs over time, ie. the gauge will gradually show lower and lower flow over time if blockage is occurring. (basically not a failsafe, but good for monitoring)

Question is, if running pure meth or even 50/50, will the UEGO be enough to show if the Meth system is failing, ie. it will run leaner and leaner over time. Or is flow monitoring system really necessary (which costs as much or even double the basic meth kit)?

Problem is I don't have an AFR failsafe (I just have the gauge). ie if it goes lean too quickly it goes boom. But I'm hoping to catch the lean AFR if blockage occurs over time, and just use a meth low level switch to cut boost if I run out of meth(which I read is the reason most engines go boom).
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 06:57 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.