waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and resources > Aquamist HFS-3 forum

Reply
 
Thread Tools Display Modes
  #1  
Old 20-02-2018, 08:13 PM
tezlum tezlum is offline
Junior Member
 
Join Date: Jan 2018
Location: Canada
Posts: 13
Default Setting WL

Currently I'm trying to set up my HFS-3.0 and I was having issues with the failsafe coming on at right when the threshold is triggered I have my threshold set to 12% with a 1.0 and .9 jet. I have the WL all the way CCW and it still goes into failsafe is this an issue of the jets flowing to low at 12% to get within the range of the flow sensor? I have a 2009 WRX with ID1000cc and using ~70% of them. Is there any way to modify it to get the sensor to read lower values with still having ~800cc/min of water/meth and still have use of the WL fail safe I did see the forum below but it was disabling the WL Failsafe http://www.aquamist.co.uk/forum2/vbu...hp/t-2647.html

Thanks in advance for tips or advice
Reply With Quote
  #2  
Old 21-02-2018, 09:32 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,714
Default Re: Setting WL

Sounded like thereis a mismatch of the iDC signal. Set the the IDC pre-scales to x1.5.
__________________
Richard L
aquamist technical support
Reply With Quote
  #3  
Old 21-02-2018, 06:56 PM
tezlum tezlum is offline
Junior Member
 
Join Date: Jan 2018
Location: Canada
Posts: 13
Default Re: Setting WL

After I solder the 1.5x scaler will all the aquamists setting now be based off the scaled injector values so if I set the threshold at 18 it would trigger when the Inj DC is at 12. Then can I use the gain to scale back the jets DC will it work if I have the gain at -25% the gain will be now 1:.75 vs the default gain of 1:1
Reply With Quote
  #4  
Old 27-02-2018, 06:36 PM
tezlum tezlum is offline
Junior Member
 
Join Date: Jan 2018
Location: Canada
Posts: 13
Default Re: Setting WL

Thanks Richard, With the 1.5x soldered and the gain at -25% I worked great and I was able to set up my WL properly now
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 11:47 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.