waterinjection.info  

Go Back   waterinjection.info > Injection Theory (what it is and what it does) > Fuel and Oxidizers

Reply
 
Thread Tools Display Modes
  #1  
Old 17-07-2004, 11:34 PM
whitecobra whitecobra is offline
Junior Member
 
Join Date: Jul 2004
Posts: 2
Default using a no2 wet kit for water /propane injection

Hi all

I am new to the site and have played around with water/alc injection a little with my hot air buick GN with good results, so I have a little knowlage on the way it works.

I currently have a 1996 Ford SVT Cobra with a procharger blower on it at 10 psi output that is intercooled with a 3 row air to air.

I have a zex wet no2 kit that I am not using and was thinking of possibly using water/alc instead of gas and propane instead of NO2 .The brain on the kit uses the pressure of the gas to adjust the fuel ratio as well to atomize the fuel when combined and discharged through the nozzle orifice. There is taloring of the fuel to gas ratio with jets.

any thoughts on this idea.

Thanks
Reply With Quote
  #2  
Old 01-07-2005, 01:12 AM
svtcobras svtcobras is offline
Junior Member
 
Join Date: Jun 2005
Location: USA
Posts: 3
Default re

what was the final outcome of this?
__________________
'99 Cobra #2473
Zex Wet Nitrous (125)
Nitrous Purge
Steeda Tri Axe Shifter
Steeda Timing Adjuster
Steeda Underdrv
Flowmaster 40
C&LTrueFlow
K&N
Cervini Bumper
Torsen T2R
FRPP 3:73
DM Speedcal
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 02:01 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.