waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-4 forum

Reply
 
Thread Tools Display Modes
  #1  
Old 25-04-2017, 05:58 PM
torquemaniac torquemaniac is offline
Junior Member
 
Join Date: Dec 2012
Location: Canada
Posts: 19
Default Meth versus fuel IDC question

Hi all,

I am fine tuning my MAF scaling to account for all the meth I am injecting, and would like to know how the HFS4 initiate meth injection when the THRESHOLD, GAIN and P/I-R are all at mid point (default setting)...

As an example, when the trigger point is at 42% F-IDC, does the HFS4 meth injection match the F-IDC of 42% (F-IDC = HFS4 DC), or does it start very progressively and only inject at say 10% DC!?
Reply With Quote
  #2  
Old 26-04-2017, 06:18 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Meth versus fuel IDC question

P/I-R at mid point, meth follows 50% on MPS and 50% on IDC. If you want IDC only, set this trimmer fully clockwise.
__________________
Richard L
aquamist technical support
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 12:04 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.