Go Back   waterinjection.info > Injection Theory (what it is and what it does) > General Effects

Thread Tools Display Modes
Old 10-01-2013, 04:25 AM
Tabasco69 Tabasco69 is offline
Junior Member
Join Date: Feb 2012
Location: Vancouver WA
Posts: 4
Default Re: Looking for a Water:Meth ratio vs cooling chart

look at this in relative terms of hp per cylinder, 500-HP V8 (62.5/HP per cylinder) versus 500-HP ST4 (125/HP per cylinder), represent a huge thermal loading difference since power equates essentially to heat/calorie units....simple terms as stated before power is heat and heat is power but to the limiting factor of what individual components can withstand and the cooling system ability to shed/offset xxx amount of heat waste in a given amount of time.
Reply With Quote
Old 22-12-2017, 08:33 AM
Join Date: Jan 2013
Location: Australia
Posts: 38
Default Re: Looking for a Water:Meth ratio vs cooling chart

Thread dig but would adding lots of methanol mean a rich afr is needed? Also with the comment of more methanol is more heat, has that anything to do with how hot methanol is when lean? Or its oxygen value? Cheers
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT +1. The time now is 09:36 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.