waterinjection.info  

Go Back   waterinjection.info > Other > Off-topic

Reply
 
Thread Tools Display Modes
  #1  
Old 25-04-2006, 01:10 PM
mb_3sgte mb_3sgte is offline
Junior Member
 
Join Date: Apr 2006
Posts: 2
Default Reputable company for Water Injection Install

Hi All,

didn't know where to plonk this so just plonked it here

could anyone suggest a reputable place in the UK, where i can get a Water Injection install carried out? I am based in the Midlands, however i dont mind travelling abit for the job to be done correctly.

Am basically looking at the Aquamist 2C system with 2E gauge.

I basically need a nice solid and clean installation.

The car is a 550BHP+ MR2 Turbo and possibly more with the 1.06 Garrett turbo housing once its fully mapped. Hence i need solid failsafes in place along.

Look forward to replies.

Cheers
Reply With Quote
  #2  
Old 26-04-2006, 12:23 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Reputable company for Water Injection Install

Quote:
Originally Posted by mb_3sgte
Hi All,

didn't know where to plonk this so just plonked it here

could anyone suggest a reputable place in the UK, where i can get a Water Injection install carried out? I am based in the Midlands, however i dont mind travelling abit for the job to be done correctly.

Am basically looking at the Aquamist 2C system with 2E gauge.

I basically need a nice solid and clean installation.

The car is a 550BHP+ MR2 Turbo and possibly more with the 1.06 Garrett turbo housing once its fully mapped. Hence i need solid failsafes in place along.

Look forward to replies.

Cheers

I know of a company in Luton, Bedfordshire called PTS. They know our product very well. The 2e is not in Production. The 2c can only work with third party management system. I think a 2d or 1s +DDS3 is a good choice.

Richard
__________________
Richard L
aquamist technical support
Reply With Quote
  #3  
Old 26-04-2006, 08:18 AM
mb_3sgte mb_3sgte is offline
Junior Member
 
Join Date: Apr 2006
Posts: 2
Default

Thanks Richard, i'll check them out. I will be running a Motec M400 so a 2c should be ok.

Thanks
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 12:13 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.