#1
|
|||
|
|||
Failsafe didn't catch a no flow jet (non conclusive:aq)
I had massive knock on cylinder 4 of my direct port setup yesterday..
My WL is set one click anticlockwise from false triggering, or one click clockwise and it activates failsafe. So how come it didn't catch this? I have followed the instructions regarding flowing the jets out of the engine and setting up the 6 bars on gauge with manual test. At 30psi boost this could have killed that cylinder... My knock sensor saved it i think. My thres is set quite low to activate at around 10psi boost. Any tips welcome. Cylinder 4 knock. |
|
|