#1
|
|||
|
|||
Need advice with Direct Port system please
Hello to all, first of all sorry for my bad English ... I need advice for setting up direct port injection...
I want to buy aquamist HSF4 system for use with my EVO 8 MR RS. But don't know how to complete the system for my needs. There is so many accessories ... I think I should buy following items. 1. Hfs4 v3 complete system. 2. 6 way hex manifold (4for DI, 2for pre TB jets) 3. 4x0.3 filtered or checkvalve jets for DI + 4x inline 30um filters. 4. 0.9 and 0.8 checkvalve jets for 8" , 16" away from tb. That's all ? Or I missed smth? Any help are welcome. My car is '05 Evo 8 MR RS 100.000+mi. Running at 1.5 bar. ~380hp crank. Stock long block / stock titanium turbo TD05HRA 9.8T. Mods are full bolt ons - Equal Lenght Exhaust manifold + map o2 dump + greddy downpipe + 3" test pipe + Apexi N1 catback. Short route ets UICP+Ets Licp v2 + Greddy R SPL intecooler. Bosch Motorsport EV14 injectors 980cc + walbro 400lph + Aeromotive FpR. P.s. We have not Methanol available here, so I will use Ethanol/distilled water 50/50 mix. |
#2
|
|||
|
|||
Re: Need advice with Direct Port system please
The list you posted is nearly complete.
1. Hfs4 v3 complete system. ...... OK 2. 6 way hex manifold (4for DI, 2for pre TB jets) ........... OK 3. 4x0.3 filtered or checkvalve jets for DI + 4x inline 30um filters ....... OK 4. 0.9 and 0.8 checkvalve jets for 8" , 16" away from tb. ........ the further away from the TB the better. At the exit of the IC is ideal. No need to have CVJ. extras: - You also need to order a few jet adaptors (x4) - two meter of 4mm PTFE hoses. (better temperature rated than nylon.
__________________
Richard L aquamist technical support |
#3
|
|||
|
|||
Re: Need advice with Direct Port system please
Quote:
Thank you Richard, is it really necessary to buy HSF4? Or for my need HFS3 is the same ? Could you be so kind to tell me price for full bolt on system with tank, jet adapters, hoses , etc. |
#4
|
|||
|
|||
Re: Need advice with Direct Port system please
HFS4 is not needed, HFS3 is perfectly fine for a non-Di fueling engine.
__________________
Richard L aquamist technical support |
#5
|
|||
|
|||
Re: Need advice with Direct Port system please
Great ! Sending PM right now for shipping quote ...
|
|
|