waterinjection.info  

Go Back   waterinjection.info > Water/Methanol database on specific model of cars > Your one-stop search for water/methanol injected cars

Reply
 
Thread Tools Display Modes
  #1  
Old 19-03-2011, 06:51 PM
WhiteKnight WhiteKnight is offline
Junior Member
 
Join Date: Aug 2010
Posts: 8
Question BMW 335i HFS-3 install

Hello guys,

I just installed HFS-3 to a BMW 335i, its working without any errors.

The problem is its injecting too early even if i set the threshold to %60-65 level.

Is this a problem related with Direct injection? I heard that they have higher frequency compared to standard injection.

By the way;

1- I did not wire MAP sensor.
2- I did not wire the yellow D.Injeciton wire. (which is described as DI-connection in the manual). i just wired RED and GREEN wires for ECU.

Are these correct?

Also, can anyone help with the internal settings of the control unit for 335i?

Waiting for your suggestions,

Regards,
Emre
Reply With Quote
  #2  
Old 19-03-2011, 11:46 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: BMW 335i HFS-3 install

Are you using the red and green wire of the green harness?
__________________
Richard L
aquamist technical support
Reply With Quote
  #3  
Old 21-03-2011, 02:32 PM
WhiteKnight WhiteKnight is offline
Junior Member
 
Join Date: Aug 2010
Posts: 8
Default Re: BMW 335i HFS-3 install

yes i'm using red and green wires of the hfs3 ecu harness
Reply With Quote
  #4  
Old 21-03-2011, 04:33 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: BMW 335i HFS-3 install

Is the red and green wire from the grey harness?

Question:
Is the HFS-3 circuit board Blue or Black?
__________________
Richard L
aquamist technical support
Reply With Quote
  #5  
Old 21-03-2011, 04:34 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: BMW 335i HFS-3 install

Where are you located?
__________________
Richard L
aquamist technical support
Reply With Quote
  #6  
Old 21-03-2011, 05:47 PM
WhiteKnight WhiteKnight is offline
Junior Member
 
Join Date: Aug 2010
Posts: 8
Default Re: BMW 335i HFS-3 install

Quote:
Originally Posted by Richard L View Post
Is the red and green wire from the grey harness?

hfs-3 harness go to the ecu of the car with 8 different color

i'm using green wire from hfs-3 harness to connect -injector
i'm using red wire from hfs-3 harness to connect ign. sw+ ( i tried also +injector)

i'm located in istanbul and i have already installed 3 hf-3 kits to subaru and porsche997tt


Question:
Is the HFS-3 circuit board Blue or Black?
it is black
Reply With Quote
  #7  
Old 21-03-2011, 06:09 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: BMW 335i HFS-3 install

OK.

You have the HFS-3 version. Recently we have include a green coded harness for the user port. This port is specially designed to read "Direct injection" signals. The 335i is signal profile/decoder is included with this unit.

Can you check if you have this harness (green coded) with your system. If you can give me the serial number on the controller, I can check it for you.
__________________
Richard L
aquamist technical support
Reply With Quote
  #8  
Old 21-03-2011, 06:33 PM
WhiteKnight WhiteKnight is offline
Junior Member
 
Join Date: Aug 2010
Posts: 8
Default Re: BMW 335i HFS-3 install

Quote:
Originally Posted by Richard L View Post
OK.

You have the HFS-3 version. Recently we have include a green coded harness for the user port. This port is specially designed to read "Direct injection" signals. The 335i is signal profile/decoder is included with this unit.

Can you check if you have this harness (green coded) with your system. If you can give me the serial number on the controller, I can check it for you.
I DON'T HAVE THIS GREEN CODED HARNESS BUT I HAVE A USER PORT IN GREEN ON MY HFS-3
HFS-3 SERIAL NO= SN-10345
Reply With Quote
  #9  
Old 21-03-2011, 07:51 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: BMW 335i HFS-3 install

Thank you. By the I am your technical support for this system.

Please pm or email me [richard@aquamist.co.uk] your postal address so that I can send you this special cable (user port) and some instructions how to configure the circuit board to suit your car.

Richard
__________________
Richard L
aquamist technical support
Reply With Quote
  #10  
Old 08-04-2011, 05:51 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: BMW 335i HFS-3 install

Have you sent your address via email yet? I like to send you this harness.
__________________
Richard L
aquamist technical support
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 08:42 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.