#1
|
|||
|
|||
Need Part # for HSV so I can get a new one!
Hello,
I have attached a picture of my system and I am looking for a part number for the circled componets. They are the ends of the High Speed Valve. They screw into the high speed valve and its where you connect the hose into. ITS THE ITEM CIRCLED BLACK! Does anyone have any spares? http://www.apisureshot.com/HSV.jpg Thanks Gregory T. Forte |
#2
|
|||
|
|||
I am pretty sure this is the part needed -
806 363 - 4mm quick-fit to M5 male connector It is unlikely anyone stocks this normally but I am sure any dealer could first confirm this is the part needed and second special order them for you. |
#3
|
|||
|
|||
Just want to make sure its this item circled.
http://www.apisureshot.com/hsvd.gif Thanks for the response. Greg |
#4
|
|||
|
|||
That is the part that I am assuming you are looking for - and I think the one I listed is it but would need to double check.
|
#5
|
|||
|
|||
As confirmed by ERL the part number provided is the one you are seeking.
|
#6
|
|||
|
|||
Need new Part #
Need new part number.
http://www.apisureshot.com/gtp/mps.jpg Its the circled item on the Manifold Pressure Switch. It holds the hose. Thanks, Greg |
#7
|
|||
|
|||
The part number is 806-364 it is a 4mm line to 1/8 pipe fitting and they ar $3.00.
__________________
Brad |
|
|