waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-3 forum

Reply
 
Thread Tools Display Modes
  #1  
Old 15-08-2011, 08:46 PM
ZedGti ZedGti is offline
Junior Member
 
Join Date: Aug 2011
Location: South Africa
Posts: 1
Default Adjusting thres and gain having no effect

Hi All

I have a Golf V Gti, have had an expert friend install the HFS 3 for me (im mechanically challenged - all i can do is drive - ) The system was working fine, however it was spraying a bit early. i attempted to adjust the threshold to spray a little later and cut down the gain so it sprays a little less. However since this any adjustments i do have no effect, the dials thres and gain turn but have no effect on the system
I am very confused now, please can someone help.
Thanks
Zed
Reply With Quote
  #2  
Old 15-08-2011, 10:27 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Adjusting thres and gain having no effect

The gain will be at "x1" from the trigger point. As the IDC climbes the effect of gain will increase.

Starting IDC trigger at a higher point won't inject more, so no need to decrease it.
__________________
Richard L
aquamist technical support
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 02:09 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.