997 turbo .. something is going wrong

[ysfg35]

I tried to active the system today but the same issues i wrote you yesterday !!
But after i did some changes to the PWM unit from inside , it made the gauge not working at like yesterday , only the yellow light apeared in the gauge , then after 5 secs it off !!! So i think the gauge is damaged !!

[Richard L]

1. Have you tried with the factory cable?
2. Unplug the blue harness and see if have made a difference (with original gauge cable) .

[ysfg35]

Originally Posted by Richard L

1. Have you tried with the factory cable?
2. Unplug the blue harness and see if have made a difference (with original gauge cable) .

Well after the gauge became not working i tried everythings , i also now running the factory wire cable .. Still same issue !
And nothing !!! Am afraied that the gauge damaged and PWM is failed !!

I

[Richard L]

You need to return the controller and gauge to us for repair. We don't charge but you have to pay shipping on both directions.

Email me: richard[at]aquamist.co.uk

[ysfg35]

Email was sent sir .. Thanks for your support

[Richard L]

Both gauge and controller were severely damaged.

It makes no difference which version of HFS-3 you have in the past. It will do the same damage.

[ysfg35]

problem solved

we tried the system and it worked perfectly

big thanks to richard for his help