Hfs-4 wiring for Audi B8 s4 3.0 (2009-2013)?

[Richard L]

I am having problem understanding your description.

Pin 37/T60 is the pre-TB MAP sensor

[MiztahSparklez]

Originally Posted by Richard L

I am having problem understanding your description.

Pin 37/T60 is the pre-TB MAP sensor

I am saying that the black/blue stripe wire I used previously for CAKA was not the right wire for me on pin 41 T60 connector. This was the one that gave me the low voltage reading.

Sorry I typed wrong it's pin 86 t90 for passenger, and 65 t90 for the driver. These are post supercharger map sensors. I did not check the map located near the TB.