#1
|
|||
|
|||
Datalogging HFS3v3
Hello forum.
I have a question regarding HFS-3 How can i get data log of 0 to 5 Volt? FIA2 Aquamist has a purple wire with voltage signal 0-100% Second question: Can i get 30 pin scheme (each pin purpose) Are there any useful pins for data logging and data graph (i marked these pins with green on the photo)? Thanks |
#2
|
|||
|
|||
Re: Datalogging HFS3v3
Here are some useful pins for data logging:
#5 ........... System start-up: 12V = system on. #6 ........... Flow sensor signal: 0.5 to 4.5V #7 ........... Water level sensor: 0v= empty, 5v= not empty #8 ........... Fuel injector (-). not direct injection. #16 ......... IDC% signal: 0 to 5V #17 ......... MPS signal: 0 to 5V (signal conditioned) #18 ......... IDC% to the water injection valve #23 ......... System power: 12V (switched/fused)
__________________
Richard L aquamist technical support |
#3
|
|||
|
|||
Re: Datalogging HFS3v3
Quote:
You could describe these pins in manual, so that would bring more customers Last edited by sniper; 01-02-2014 at 10:18 PM. |
#4
|
|||
|
|||
Re: Datalogging HFS3v3
Those pins are not static-protected so I rather use them as intended for remote diagnostic usage. They exist for the benefit for us and customer without working knowledge of our system but equipped with a simple $10 digital voltmeter.
It has been extremely useful since it was introduced. For more knowledgeable users, all they need to do is ask here.
__________________
Richard L aquamist technical support |
#5
|
|||
|
|||
Re: Datalogging HFS3v3
Richard L at 402 meters there is no time to consider devices.
Everything that happens with the engine we look at dataloge after racing. |
#6
|
|||
|
|||
Re: Datalogging HFS3v3
What car is it? A 10s/quarter one?
__________________
Richard L aquamist technical support |
#7
|
|||
|
|||
Re: Datalogging HFS3v3
|
#8
|
|||
|
|||
Re: Datalogging HFS3v3
Wow, very impressive! How much power?
I can seem to see the data datalog. It will be quite interesting.
__________________
Richard L aquamist technical support |
#9
|
|||
|
|||
Re: Datalogging HFS3v3
Richard AUXFS control only HFS4?
HFS3 do not have it? Quote:
Quote:
Last edited by sniper; 05-02-2014 at 03:01 PM. |
#10
|
|||
|
|||
Re: Datalogging HFS3v3
Interesting 11s log. Are you able to log the water flow now?
Only HFS4 has AUXFS.
__________________
Richard L aquamist technical support |
|
|