waterinjection.info  

Go Back   waterinjection.info > Water/Methanol database on specific model of cars > Your one-stop search for water/methanol injected cars

Reply
 
Thread Tools Display Modes
  #1  
Old 18-07-2011, 11:10 PM
obsolete obsolete is offline
Junior Member
 
Join Date: Jul 2011
Location: Canada
Posts: 8
Default 08 WRX failsafe w/ HFS6 & GrimmSpeed EBCS

I'm using a GrimmSpeed 3-port EBCS and an HFS6. Would like to know the ideal way to utilize the failsafe on the HFS6.

Since this EBCS connects to factory harness and such, should I connect white and brown wires as I would with an OEM boost control?

Also, is this diagram of HFS3 wiring applicable with the HFS6 as well?

Thanks!
Attached Images
File Type: gif H3-08wrx.gif (141.6 KB, 18 views)
Reply With Quote
  #2  
Old 19-07-2011, 04:10 AM
Howerton Engineering
Guest
 
Posts: n/a
Default Re: 08 WRX failsafe w/ HFS6 & GrimmSpeed EBCS

As for the failsafe yes, just consider the GS unit to be the same as the OE unit for hooking up the wiring.

The connector on the HFS-6 is yellow, but the red/green/brown/white are all used the same.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 02:35 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.