waterinjection.info  

Go Back   waterinjection.info > Injection Theory (what it is and what it does) > Fuel and Oxidizers

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 18-08-2011, 10:46 AM
Autosri Autosri is offline
Junior Member
 
Join Date: Aug 2011
Location: Leicester
Posts: 3
Default Nitrous and water injection

Hi I'm new to the forum and I'm after a bit of help from those with more experience
I have a BMW e46 330 that I have just fitted a wizards of nos kit to but when it comes in I feel it retard the timing due to knock I think so looking for water injection to reduce knock
I have a 3lpm 65psi on demand pump and a spare solenoid for the nitrous I can use and will be picking up an aquamist nozzle when I know what size I need

The car runs perfect off nitrous so I'm happy that I don't need the water injection then
The plan is link a second solenoid to the pulse width controller for the fuel so only when the nitrous works the water works so almost like running the car on normal fuel and using race gas on the nitrous

The fuel jet in the nitrous setup should flow 60ml of fuel in 10 seconds I think what is a good mixture ratio for water and petrol for knock protection what size nozzle would you recomend I want an aqua mist one because the atomisation is miles better than others

No doubt I have missed some info

Thanks
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 07:00 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.