waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-4 forum

Reply
 
Thread Tools Display Modes
  #61  
Old 17-03-2016, 09:41 PM
Maktech Maktech is offline
Member
 
Join Date: Mar 2016
Location: Istanbul
Posts: 35
Default Re: Help please,HFS 4 V3 wiring diagram for E63 AMG

By the way we use one jet , could you describe me how to modify the circuit for one jet ?
Reply With Quote
  #62  
Old 17-03-2016, 10:11 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Help please,HFS 4 V3 wiring diagram for E63 AMG

Quote:
Originally Posted by Maktech View Post
We are using only the red wire of grey conncetor for 12V
Good, That is all you need to d on the grey wire.
__________________
Richard L
aquamist technical support
Reply With Quote
  #63  
Old 17-03-2016, 10:12 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Help please,HFS 4 V3 wiring diagram for E63 AMG

Quote:
Originally Posted by Maktech View Post
By the way we use one jet , could you describe me how to modify the circuit for one jet ?
What size?
__________________
Richard L
aquamist technical support
Reply With Quote
  #64  
Old 17-03-2016, 10:21 PM
Maktech Maktech is offline
Member
 
Join Date: Mar 2016
Location: Istanbul
Posts: 35
Default Re: Help please,HFS 4 V3 wiring diagram for E63 AMG

Quote:
Originally Posted by Richard L View Post
What size?
The 550cc one
Reply With Quote
  #65  
Old 17-03-2016, 10:32 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Help please,HFS 4 V3 wiring diagram for E63 AMG

You don't need to make any circuit change with that.
__________________
Richard L
aquamist technical support
Reply With Quote
  #66  
Old 18-03-2016, 12:54 PM
Maktech Maktech is offline
Member
 
Join Date: Mar 2016
Location: Istanbul
Posts: 35
Default Re: Help please,HFS 4 V3 wiring diagram for E63 AMG

Richard,
Thanks for the support.

we cut the thin wire between at C ,
And also we change the position of a jumper ;
The system is okay , now
Reply With Quote
  #67  
Old 18-03-2016, 06:22 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Help please,HFS 4 V3 wiring diagram for E63 AMG

According to our record, your system was shipped to someone in Bulgaria. It was April last year, It took almost a year. Some solder configurations were incorrect, it was not done At aquamist. You friend was not telling the truth. It could not be brand new.

You have one more solder mods. The MPS "2" link has to either be cut or unsolder "3".
__________________
Richard L
aquamist technical support
Reply With Quote
  #68  
Old 18-03-2016, 08:03 PM
Maktech Maktech is offline
Member
 
Join Date: Mar 2016
Location: Istanbul
Posts: 35
Default Re: Help please,HFS 4 V3 wiring diagram for E63 AMG

Yes , we made all modifications that you told me then we had another issue ,
The pump comed on at idle ; this time it was injecting water , too .
We changed the jumper IDC to MPS and the system is working without any problem.
I am sending you the last positions of the jumpers :

Reply With Quote
  #69  
Old 18-03-2016, 11:32 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Help please,HFS 4 V3 wiring diagram for E63 AMG

OK, so far so good.

Lets look into the IDC trigger problem.

I like to take some voltage reading on test pin #16 at:

1. pre-crank
2. idling
3. quick flip of the throttle.
__________________
Richard L
aquamist technical support
Reply With Quote
  #70  
Old 19-03-2016, 01:16 AM
Maktech Maktech is offline
Member
 
Join Date: Mar 2016
Location: Istanbul
Posts: 35
Thumbs up Re: Help please,HFS 4 V3 wiring diagram for E63 AMG

Quote:
Originally Posted by Richard L View Post
OK, so far so good.

Lets look into the IDC trigger problem.

I like to take some voltage reading on test pin #16 at:

1. pre-crank
2. idling
3. quick flip of the throttle.
I will measure it on monday
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 05:21 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.