waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-4 forum

Reply
 
Thread Tools Display Modes
  #31  
Old 10-06-2017, 08:20 AM
VeightTT VeightTT is offline
Junior Member
 
Join Date: Apr 2017
Location: Houston
Posts: 23
Default Re: Map sensor or lack of?

yes Andrew
Reply With Quote
  #32  
Old 10-06-2017, 08:22 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Map sensor or lack of?

I saw the voltage of 0.771v at the ECU. it is quite low for the MAP sensor. It should be around 1.5v at pre-crank. Also check the continuity of the blue wire of the grey harness because the the same voltage was not appearing the the RJ connector.
__________________
Richard L
aquamist technical support
Reply With Quote
  #33  
Old 10-06-2017, 08:37 AM
VeightTT VeightTT is offline
Junior Member
 
Join Date: Apr 2017
Location: Houston
Posts: 23
Default Re: Map sensor or lack of?

yes the continuity has been checked the voltage is not making it from one end to the other. how else am I supposed to check it?
Reply With Quote
  #34  
Old 10-06-2017, 08:56 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Map sensor or lack of?

I suppose you can use the resistance option on the Fluke to probe the the two ends on the the blue wire. It should be near 0 ohms. One end on the gold figure of the RJ. May need to sharpen your probe.
__________________
Richard L
aquamist technical support
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 12:14 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.