waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-4 forum

Reply
 
Thread Tools Display Modes
  #21  
Old 30-06-2013, 11:52 PM
andysharp andysharp is offline
Member
 
Join Date: Dec 2011
Location: dunfermline
Posts: 49
Default Re: Peugeot 207 GTI - HFS4 Finished Tomorrow

yeh have a wee note in it for u with return address.
Reply With Quote
  #22  
Old 03-07-2013, 10:20 AM
andysharp andysharp is offline
Member
 
Join Date: Dec 2011
Location: dunfermline
Posts: 49
Default Re: Peugeot 207 GTI - HFS4 Finished Tomorrow

morning Richard, that's the controller back already, many thanks!

now just set the SC at 12, WL at 10, WH at 2 and we all good? just click the SC, WL and WH round with small screwdriver and that's them set?
Reply With Quote
  #23  
Old 03-07-2013, 10:44 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Peugeot 207 GTI - HFS4 Finished Tomorrow

The WL and WH sets the failsafe window width. you need to trim them until the faislafe does not trigger on a daily drive cycle.

Don't forget to set the SC so the gauge does not exceed 6 bars under the manual test.
__________________
Richard L
aquamist technical support
Reply With Quote
  #24  
Old 03-07-2013, 10:48 AM
andysharp andysharp is offline
Member
 
Join Date: Dec 2011
Location: dunfermline
Posts: 49
Default Re: Peugeot 207 GTI - HFS4 Finished Tomorrow

will be going out shortly so will let you know how it goes.

just blipping the throttle there the B was lighting up , the SC giving 4 bars which am fine with.
Reply With Quote
  #25  
Old 03-07-2013, 11:30 AM
andysharp andysharp is offline
Member
 
Join Date: Dec 2011
Location: dunfermline
Posts: 49
Default Re: Peugeot 207 GTI - HFS4 Finished Tomorrow

been out in car and running perfect now Richard!

cant thank you enough!!

put the threshold back to default and the SC, WL and WH at recommended points by urself and flowing 3 and 4 bars which is perfect for me, real pick up in the car when it kicks in!!!
Reply With Quote
  #26  
Old 03-07-2013, 06:07 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Peugeot 207 GTI - HFS4 Finished Tomorrow

Does 4 bars represent WOT?
__________________
Richard L
aquamist technical support
Reply With Quote
  #27  
Old 03-07-2013, 09:58 PM
andysharp andysharp is offline
Member
 
Join Date: Dec 2011
Location: dunfermline
Posts: 49
Default Re: Peugeot 207 GTI - HFS4 Finished Tomorrow

not sure what you mean by WOT ?????
Reply With Quote
  #28  
Old 03-07-2013, 10:42 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Peugeot 207 GTI - HFS4 Finished Tomorrow

Wide open throttle
__________________
Richard L
aquamist technical support
Reply With Quote
  #29  
Old 03-07-2013, 11:44 PM
andysharp andysharp is offline
Member
 
Join Date: Dec 2011
Location: dunfermline
Posts: 49
Default Re: Peugeot 207 GTI - HFS4 Finished Tomorrow

ah!!

yeh it does. car performs really well with it, pulls all the way to red line.
Reply With Quote
  #30  
Old 04-07-2013, 08:13 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Peugeot 207 GTI - HFS4 Finished Tomorrow

You can advance the SC to show 5-6 bars instead of 4 bars. May be a click or two will do it. Do the same for the WL and WH. (all clockwise)
__________________
Richard L
aquamist technical support
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 12:29 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.