waterinjection.info  

Go Back   waterinjection.info > Injection Theory (what it is and what it does) > Injection Mixtures

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 13-07-2004, 11:14 PM
hotrod hotrod is offline
Senior Member
 
Join Date: Oct 2003
Posts: 307
Default fuel methanol

The methanol I buy is to the best of my knowledge 100% methanol. It is sold from the drum at a local speed shop for racers that run in race classes which allow methanol fuel. I think the last I bought went for $2.25 / gal.

If it had gasoline in it, I should have seen it settle out when I mix it with water.

If you're not sure, the low tech fuel test to check for alcohol mixed with gasoline is to take an old baby bottle, put about 50 ml water in it, and then add 50 ml of the fuel. Shake for about 15 seconds and then let it stand. If it has gasoline and alcohol mixed, they should separate out into layers.

If its pure alcohol you'll end up with slightly less than 100 ml of mixture and no separation. If it has gasoline in it at say 15% you should end up with about 1.5 ml layer of gasoline.

Larry
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 11:01 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.