#1
|
|||
|
|||
Antifreeze in the injection mixture?
this past winter it was so cold that even a 50/50 methanol mixture, while not freezing in the tank, Would freeze in the 4mm lines.
Any point in adding, say, about 10-20% of that mixture as conventional Ethylene Glycol Antifreeze? How would it impact the performance of the system, and, how would it impact the pump?
__________________
------ Paul E - '99 White M3; < 69K miles; Dinan SC kit with 6" RMS crank pulley and water/air Aftercooler: 11 psi-367 SAE rwhp/304 ftlbs; Custom Tuning by Nick G; AA Aquamist Water/Methanol Injection and AA exhaust; Fikse FM-10s; |
|
|