waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-6 forum

Reply
 
Thread Tools Display Modes
  #1  
Old 28-05-2010, 08:00 PM
abcmzy abcmzy is offline
Junior Member
 
Join Date: May 2010
Posts: 1
Default hfs-6 install problem??

i installed hfs-6 system on my tt 350z,runing 800cc injectors,50/50 meth
two jets one 0.9mm one 1.0mm with 0.9mm restrictor on the unit.

when every i turn off the ignition the nozzles will spray for 1 sec is that normal??

all pre-test are ok
Reply With Quote
  #2  
Old 29-05-2010, 02:33 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: hfs-6 install problem??

Can you check the red wire from the yellow connector is wire to a 12v source that only becomes active at the same time as the fuel injector(+)

If you have an ECU pinout for the car, I can produce a specific wiring drawing for this car.
__________________
Richard L
aquamist technical support
Reply With Quote
  #3  
Old 31-05-2010, 04:09 PM
Prometeus Prometeus is offline
Member
 
Join Date: May 2005
Location: Zelo Buon Persico
Posts: 50
Default Re: hfs-6 install problem??

Trouble in Italy, the installer put on BMW racing car HFS 6 and works out when the engine is off... please Richard which is the wrong wire connection???
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 09:48 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.