waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-6 forum

Reply
 
Thread Tools Display Modes
  #11  
Old 02-08-2012, 10:14 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Having issues with HFS-6

open up the FCM...

1. Pick out the brown wire from the 8-core cable
2. Cut it as closely as possible from the circuit board.
3. Cut the "non-red" wire off the solenoid valve pin. Tape it up.
4. Solder the brown wire to the same pin.
5. Now the valve is driven directly from the controller.
__________________
Richard L
aquamist technical support
Reply With Quote
  #12  
Old 11-08-2012, 02:46 AM
primetime2123 primetime2123 is offline
Junior Member
 
Join Date: Jul 2012
Location: el paso, tx
Posts: 13
Default Re: Having issues with HFS-6

Quote:
Originally Posted by Richard L View Post
open up the FCM...

1. Pick out the brown wire from the 8-core cable
2. Cut it as closely as possible from the circuit board.
3. Cut the "non-red" wire off the solenoid valve pin. Tape it up.
4. Solder the brown wire to the same pin.
5. Now the valve is driven directly from the controller.
Hey Richard..so I connected the brown wire to the black wire in the FCM. It doesn't click anymore but I was wondering if anything was reset since my car was already tuned with the aquamist kit.
Reply With Quote
  #13  
Old 11-08-2012, 08:41 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Having issues with HFS-6

1) Can you send me a picture of the modifications. I like to check it.
2) Can you use the manual test "TST" and let me know if the valves actives. Make sure the INJ is linked.
__________________
Richard L
aquamist technical support
Reply With Quote
  #14  
Old 11-08-2012, 10:14 PM
primetime2123 primetime2123 is offline
Junior Member
 
Join Date: Jul 2012
Location: el paso, tx
Posts: 13
Default Re: Having issues with HFS-6

Quote:
Originally Posted by Richard L View Post
1) Can you send me a picture of the modifications. I like to check it.
2) Can you use the manual test "TST" and let me know if the valves actives. Make sure the INJ is linked.
here is a pic of the solder of the brown to black wire
Reply With Quote
  #15  
Old 11-08-2012, 11:23 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Having issues with HFS-6

Thank you for the picture. the modification is perfect.

Can you reassemble the FCM fully and do a manual "TST". With the "INJ" link on. You can disconnect the hose to the water jet so you can see the spray if there is working normally.
__________________
Richard L
aquamist technical support
Reply With Quote
  #16  
Old 14-08-2012, 02:46 AM
primetime2123 primetime2123 is offline
Junior Member
 
Join Date: Jul 2012
Location: el paso, tx
Posts: 13
Default Re: Having issues with HFS-6

Quote:
Originally Posted by Richard L View Post
Thank you for the picture. the modification is perfect.

Can you reassemble the FCM fully and do a manual "TST". With the "INJ" link on. You can disconnect the hose to the water jet so you can see the spray if there is working normally.
yes Richard it does spray..The water level led comes on when it sprays...It didn't affect the spraying but it does come on...I tried a couple of pulls and the same the water level comes on when it sprays..didn't affect anything though

Last edited by primetime2123; 14-08-2012 at 02:53 AM.
Reply With Quote
  #17  
Old 14-08-2012, 06:50 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Having issues with HFS-6

The water level led is doubled up as failsafe activation. If you haven't yet set up the failsafe as described in the user manual, I will help you setting it.

Querstion...

What is the maximum number of bars displayed on the gauge at WOT?
__________________
Richard L
aquamist technical support
Reply With Quote
  #18  
Old 15-08-2012, 01:02 AM
primetime2123 primetime2123 is offline
Junior Member
 
Join Date: Jul 2012
Location: el paso, tx
Posts: 13
Default Re: Having issues with HFS-6

Quote:
Originally Posted by Richard L View Post
The water level led is doubled up as failsafe activation. If you haven't yet set up the failsafe as described in the user manual, I will help you setting it.

Querstion...

What is the maximum number of bars displayed on the gauge at WOT?
It looked like it was 6 bars...not sure if the tuner set up the failsafe or not
Reply With Quote
  #19  
Old 15-08-2012, 07:14 AM
primetime2123 primetime2123 is offline
Junior Member
 
Join Date: Jul 2012
Location: el paso, tx
Posts: 13
Default Re: Having issues with HFS-6

When I filled up the tank all the way the water level led would stop flashing when it sprayed. Is it supposed to flash like that when the water level in the tank is lower ??
Reply With Quote
  #20  
Old 15-08-2012, 07:52 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: Having issues with HFS-6

The led should not be flashing at all. Only the action of lever arm of the sensor moved by water near the empty period makes the led flash.
__________________
Richard L
aquamist technical support
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 02:02 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.