waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-3 forum > HFS-3 wiring diagram to a specific model of car

Reply
 
Thread Tools Display Modes
  #1  
Old 14-03-2010, 11:21 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default AUDI specific wiring diagrams...

__________________
Richard L
aquamist technical support
Reply With Quote
  #2  
Old 14-03-2010, 09:35 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: AUDI specific wiring diagrams...

__________________
Richard L
aquamist technical support
Reply With Quote
  #3  
Old 16-03-2010, 07:49 PM
gearhead1186 gearhead1186 is offline
Junior Member
 
Join Date: Jan 2010
Posts: 8
Default Re: AUDI specific wiring diagrams...

thanks a bunch!!
Reply With Quote
  #4  
Old 03-08-2012, 06:17 PM
yakuzaru yakuzaru is offline
Junior Member
 
Join Date: Jul 2012
Location: Turkey
Posts: 2
Default Re: AUDI specific wiring diagrams...

Richard I ll be glad if you add 2008 s3 2.0 t fsi wiring diagram too.
Reply With Quote
  #5  
Old 03-08-2012, 07:34 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: AUDI specific wiring diagrams...

I did a little research, audi S3 turbo has many many engine codes:
1.2 TFSI (2010 on ) ........... CBZB
1.4 TFSI (2007 on) ........ CAXC
1.8 TFSI (2007 - 2008) ....... BYT/BZB
1.8 TFSI (2009 on) ......... CDAA
2.0 TFSI (2004-2008) ......... AXX/BPY/BWA/CAWB
2.0 TFSI (2009 on) ............. CCZA
2.0 TFSI (2006 on) S3 only ................. BHZ/CDLA
2.5 TFSI (2011 on) RS3 only ................ CEPA

Which one is yours?
__________________
Richard L
aquamist technical support
Reply With Quote
  #6  
Old 04-08-2012, 09:39 AM
yakuzaru yakuzaru is offline
Junior Member
 
Join Date: Jul 2012
Location: Turkey
Posts: 2
Default Re: AUDI specific wiring diagrams...

BZC001301 is written on engine bay.
So which one is the proper one I can't figure out.
Do you have any idea?
Reply With Quote
  #7  
Old 04-08-2012, 10:34 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: AUDI specific wiring diagrams...

I working on them. Only recently I realised how many variations are there. Luckily the engine mangements stay pretty constant.

It is just as simple easy to splice it at the fuel injector rather at the ECM.

I would welcome anyone who can submit any useful ECM pin out to help.
__________________
Richard L
aquamist technical support
Reply With Quote
  #8  
Old 19-09-2012, 05:52 PM
Simons Simons is offline
Junior Member
 
Join Date: Sep 2012
Location: Spain
Posts: 4
Default Re: AUDI specific wiring diagrams...

Hi Richard, I'm going to install the HFS-3 on an audi s2 ABY, and my question is if you know what wire I need to cut to install the fail safe, boost cut, and what wire is the inj#1

I think the signal inj#1 that I need, It's pin 36, is it right?

For the boost I have a external MAP sensor, because don't want to weld one wire on ecu, do I need to cut the boost signal wire and intercalate white and brown wire after blue wire??



I attach you a little scheme of the injection

http://www.s2central.net/S2_Schematics/B/B73-04.pdf

Thanks!
Reply With Quote
  #9  
Old 20-09-2012, 09:15 AM
Simons Simons is offline
Junior Member
 
Join Date: Sep 2012
Location: Spain
Posts: 4
Default Re: AUDI specific wiring diagrams...

I was thinking about the fail safe and what I wrote was bad...I think that I need to cut and intercalate the aquamist wires between N75 wire, pin 33, because It's what control the boost, open and close the wastegate

http://www.s2central.net/S2_Schematics/B/B73-05.pdf

the boost and injector signal I think it's good
Reply With Quote
  #10  
Old 20-09-2012, 09:49 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: AUDI specific wiring diagrams...

Yes, you are 100% correct.

White wire to pin33 and brown wire to N75
__________________
Richard L
aquamist technical support
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 09:29 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.