waterinjection.info  

Go Back   waterinjection.info > Other > Gallery - NEW

Reply
 
Thread Tools Display Modes
  #1  
Old 18-08-2005, 02:48 AM
franz@ktr franz@ktr is offline
Junior Member
 
Join Date: Dec 2004
Location: massachusettes
Posts: 3
Default 2002 Subaru WRX - Aquamist

I did a "budget" install for a customer recently...

here is the jet install for the top mount intercooler...



here is a close up... the sensor is for intercooler temperature (inlet/outlet)...



control box for FIA, fuse, priming pump signal extender, monmentary manual priming pump switch (if needed)...



inside...



here is the pump and related component install in the rain tray... pump is attatched with isolation mounts to reduce noise in the cabin...



and with the rain tray installed...



and a STi Version 8 spec C tank in the trunk...



descriptions are still awful, because i still need sleep.
__________________
www.ktrperformance.com
Reply With Quote
  #2  
Old 19-08-2005, 03:32 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,898
Default

Great set of pictures. You are taking a great deal of trouble refining our system- good and neat work.

Are you using the existing hose that comes from the 12L tank to the front of the engine bay, next to the bulk head. Idf you do, you can also take the advantage of the priming pump. You can activate the priming pump with the "pulse extender" which you are good in making them in house.

The existing dash "intercooler spray" button can now power a inline solenoid valve to the existing intercooler spray jets. The water is drawn from the 806-201 manifolds (tee of from blanking plug if an accumul;ator is not fitted). But be careful, the water pressure is now at 7 bar so you mey need to change the existing intercooler spray jet to one of our smaller jet or risking empty your 12L tank in 3 minures flat.

Get some good sleep this weekend.

We have a few customer that did this and found the spray pattern is better than the original spray jets.
__________________
Richard L
aquamist technical support
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 01:21 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.