waterinjection.info  

Go Back   waterinjection.info > Other > Gallery - NEW

Reply
 
Thread Tools Display Modes
  #421  
Old 10-06-2018, 06:16 PM
RICE RACING RICE RACING is offline
Senior Member
 
Join Date: Oct 2003
Location: Utopia
Posts: 415
Default Re: RICESP Water Injected RX7

Quote:
Originally Posted by theboostshack View Post
Great work mate. Love watching you take it to the next level. I see you are using the twin solenoid manifold in that built. Are you using the larger pump in that build as well?
I enjoy seeing you and everyone else who does this seriously just as much, its what pushes all of us to do what we do. I remember the days when I was having 'debates' with total nobodies and self professed experts about the merits of water injection, such a fucking waste of my time. Today (not that it needed it!) while there is still ample bullshit and commentary from the youtube scammers and talking heads blogging their way to mediocrity one thing stands, and that is the total and utter superiority of water injection in the internal combustion engine. It's never been a better time to rediscover something that was proven so long ago.

Larger pumps in both cars now, correct.
__________________
http://www.riceracing.com.au
RICESP > F40 > Zonda > ZR1
Water Injection Specialist
"Can't be defeated!, don't know the word!, shoulder to shoulder!, we'll fight the world!, WE CAN'T BE BEATEN!!!"
Reply With Quote
  #422  
Old 18-06-2018, 10:45 PM
RICE RACING RICE RACING is offline
Senior Member
 
Join Date: Oct 2003
Location: Utopia
Posts: 415
Default Re: RICESP Water Injected RX7

Little write up on the R34 GTR here > http://www.riceracing.com.au/rides/D...34_Charles.htm getting to 1 hour on load (full power) just a little more than your average 'drag' spec build hahaha! 19 hours to go before engine inspection required!
__________________
http://www.riceracing.com.au
RICESP > F40 > Zonda > ZR1
Water Injection Specialist
"Can't be defeated!, don't know the word!, shoulder to shoulder!, we'll fight the world!, WE CAN'T BE BEATEN!!!"
Reply With Quote
  #423  
Old 03-07-2018, 09:29 AM
RICE RACING RICE RACING is offline
Senior Member
 
Join Date: Oct 2003
Location: Utopia
Posts: 415
Default Re: RICESP Water Injected RX7

Customer cleaned up the look a bit by fitting different cam phase trigger set up and the OG Blue Tomei cover, looks nicer and better when the cam belt slaps around on the various limiters. Little video of the idle attached too, there is not much room in the engine bay! twins would be a lesbian to fit for sure.... EFR9180 still going too :P



https://www.youtube.com/watch?v=F2ig...ature=youtu.be
__________________
http://www.riceracing.com.au
RICESP > F40 > Zonda > ZR1
Water Injection Specialist
"Can't be defeated!, don't know the word!, shoulder to shoulder!, we'll fight the world!, WE CAN'T BE BEATEN!!!"
Reply With Quote
  #424  
Old 17-07-2018, 08:22 AM
RICE RACING RICE RACING is offline
Senior Member
 
Join Date: Oct 2003
Location: Utopia
Posts: 415
Default Re: RICESP Water Injected RX7

Here is the latest iteration on the 9180 13B set up, WM50 upgraded and testing many parts, all in the search for durability. drugracers and TA one lap wonders need not apply lol :P







__________________
http://www.riceracing.com.au
RICESP > F40 > Zonda > ZR1
Water Injection Specialist
"Can't be defeated!, don't know the word!, shoulder to shoulder!, we'll fight the world!, WE CAN'T BE BEATEN!!!"
Reply With Quote
  #425  
Old 31-07-2018, 11:28 AM
RICE RACING RICE RACING is offline
Senior Member
 
Join Date: Oct 2003
Location: Utopia
Posts: 415
Default Re: RICESP Water Injected RX7

Bigger and Better than ever..... the development race continues.
RR leading the way with the best, most proven, 'true road going' performance cars on the planet.

__________________
http://www.riceracing.com.au
RICESP > F40 > Zonda > ZR1
Water Injection Specialist
"Can't be defeated!, don't know the word!, shoulder to shoulder!, we'll fight the world!, WE CAN'T BE BEATEN!!!"
Reply With Quote
  #426  
Old 29-08-2018, 10:41 PM
RICE RACING RICE RACING is offline
Senior Member
 
Join Date: Oct 2003
Location: Utopia
Posts: 415
Thumbs up Re: RICESP Water Injected RX7

Got some?

RRWEP140 water injection equipped 4cyl turbo did a back to back run over standing mile event, nice road car set up.

331kph followed up by 335kph

Water Injection and a engine build by the owner fixed it up from being a piston/valve eating nightmare into a proven durable engine set up
__________________
http://www.riceracing.com.au
RICESP > F40 > Zonda > ZR1
Water Injection Specialist
"Can't be defeated!, don't know the word!, shoulder to shoulder!, we'll fight the world!, WE CAN'T BE BEATEN!!!"
Reply With Quote
  #427  
Old 08-09-2018, 12:13 AM
RICE RACING RICE RACING is offline
Senior Member
 
Join Date: Oct 2003
Location: Utopia
Posts: 415
Thumbs up Re: RICESP Water Injected RX7

External thread link to the above car > http://www.efi101.com/forum/viewtopi...r=asc&start=40 another one sorted out, warning graphic content!

Water Injection and qualified technical advice to the rescue.
__________________
http://www.riceracing.com.au
RICESP > F40 > Zonda > ZR1
Water Injection Specialist
"Can't be defeated!, don't know the word!, shoulder to shoulder!, we'll fight the world!, WE CAN'T BE BEATEN!!!"
Reply With Quote
  #428  
Old 15-11-2018, 05:57 AM
RICE RACING RICE RACING is offline
Senior Member
 
Join Date: Oct 2003
Location: Utopia
Posts: 415
Wink Re: RICESP Water Injected RX7

Unlike the kiddie pretenders, these cars keep on running all thanks to pump petrol and water injection.

No guessing on E-Media Arsebook/Gagtube, no secret rebuilds after one dyno pull needing to get pushed off due to non running/broken engine, no hype, no snake oil E85............
I don't say we do it better, rather just make cars that are fast and durable. Stuff most others can only dream/post/blog about.

No doctored power claims either, just facts. Got a 13B turbo that accelerates harder? that can be driven somewhere? without a spare engine? love to see it!

__________________
http://www.riceracing.com.au
RICESP > F40 > Zonda > ZR1
Water Injection Specialist
"Can't be defeated!, don't know the word!, shoulder to shoulder!, we'll fight the world!, WE CAN'T BE BEATEN!!!"

Last edited by RICE RACING; 15-11-2018 at 07:44 PM. Reason: detailed
Reply With Quote
  #429  
Old 16-11-2018, 01:30 AM
RICE RACING RICE RACING is offline
Senior Member
 
Join Date: Oct 2003
Location: Utopia
Posts: 415
Talking Re: RICESP Water Injected RX7

Small side note:
If you look back at page 8 there was VBOX data from a mildly tuned R35 GTR (1750kg) anyway that thing had 0.42g acceleration at 140kph in the report listed. The RX7 is stupidly fast!

__________________
http://www.riceracing.com.au
RICESP > F40 > Zonda > ZR1
Water Injection Specialist
"Can't be defeated!, don't know the word!, shoulder to shoulder!, we'll fight the world!, WE CAN'T BE BEATEN!!!"

Last edited by RICE RACING; 16-11-2018 at 01:13 PM.
Reply With Quote
  #430  
Old 16-11-2018, 12:37 PM
RICE RACING RICE RACING is offline
Senior Member
 
Join Date: Oct 2003
Location: Utopia
Posts: 415
Smile Re: RICESP Water Injected RX7

When you have real roads cars that run all the time, you can prove performance on demand
See below:
As stated, they run, they last, they have no issues, thanks to Water Injection.
3.15lt 6cyl V's 2.616lt 13B rotary (on equiv 720 degree's crank measure).
Much larger heavier car, with allot more power, but when compared in real world at speed its hard to beat a RX7, and the rotary sounds so much better!
We are working on an AMS powered EVO9 next, with another large turbo and water injected, stay tuned for that!



__________________
http://www.riceracing.com.au
RICESP > F40 > Zonda > ZR1
Water Injection Specialist
"Can't be defeated!, don't know the word!, shoulder to shoulder!, we'll fight the world!, WE CAN'T BE BEATEN!!!"
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 06:03 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.