waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-4 forum

Reply
 
Thread Tools Display Modes
  #1  
Old 02-08-2019, 05:04 PM
xssploit xssploit is offline
Junior Member
 
Join Date: Jul 2019
Location: Moscow
Posts: 1
Default HFS-4 calibration

Hi guys! I'am newbie and very bad English
I have passat cc 4x4 2.0 cczb on JE pistons, IE rods, garrett 3076 gen2 and of course wmi HFS-4.
Everything was fine a while ago, methanol injection was set up and I didn't see the ignition retards, but recently found out that my exhaust manifold was cracked, I changed it, but now methanol is consumed much less and I see retards up to 6 degrees. I need your help in setup methanol injection to remove retards.
Let me know if need other info.
Reply With Quote
  #2  
Old 11-08-2019, 12:29 PM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: HFS-4 calibration

does the gauge show flow as before?
__________________
Richard L
aquamist technical support
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 10:05 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.