Hfs-4 wiring for Audi B8 s4 3.0 (2009-2013)?

[Richard L]

One step at a time, and update every stage if possible..

Can you measure the voltage of pin 2 when the idle and WOT?

[infinkc]

Originally Posted by Richard L

One step at a time, and update every stage if possible..

Can you measure the voltage of pin 2 when the idle and WOT?

Haven't had anytime to get the measurements yet. Still on my to do list.

What do you think about adding a single .3 injector pre blower? just for air cooling, would it work ok with my direct port setup? I would jut run a line off the end of the 6 port manifold where its currently plugged.