waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-4 forum

Reply
 
Thread Tools Display Modes
  #1  
Old 23-03-2013, 05:01 AM
dave80 dave80 is offline
Member
 
Join Date: Sep 2012
Location: Chicago, IL
Posts: 38
Default VW MK5 HFS-4 DPI install.

I did some work today and almost finished the aquamist install. Made two brackets for the distribution manifold port that bolted up to the noise pipe bracket on the alternator:



but ended up using this one






fav mounted on the engine mount (plastic bracket used to hold the noise pipe)











Now I just have to splice some ecu wires and make the final electrical connections and I'm ready to go.
Reply With Quote
  #2  
Old 24-03-2013, 10:20 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: VW MK5 HFS-4 DPI install.

Looking great. Nice install.

What are the sizes of those checkvakve jets?
__________________
Richard L
aquamist technical support
Reply With Quote
  #3  
Old 24-03-2013, 11:07 PM
dave80 dave80 is offline
Member
 
Join Date: Sep 2012
Location: Chicago, IL
Posts: 38
Default Re: VW MK5 HFS-4 DPI install.

Quote:
Originally Posted by Richard L View Post
What are the sizes of those checkvakve jets?
jets are 0.3mm
Reply With Quote
  #4  
Old 25-03-2013, 01:04 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: VW MK5 HFS-4 DPI install.

It looked like 0.7mm!!!

What power is this engine capable of?
__________________
Richard L
aquamist technical support
Reply With Quote
  #5  
Old 25-03-2013, 03:43 AM
dave80 dave80 is offline
Member
 
Join Date: Sep 2012
Location: Chicago, IL
Posts: 38
Default Re: VW MK5 HFS-4 DPI install.

currently i'm running apr's K04 turbo and tune, but that's a mild safe upgrade for a daily driven car.


Last edited by dave80; 25-03-2013 at 03:47 AM.
Reply With Quote
  #6  
Old 13-04-2013, 08:43 AM
dave80 dave80 is offline
Member
 
Join Date: Sep 2012
Location: Chicago, IL
Posts: 38
Default Re: VW MK5 HFS-4 DPI install.

Final install pics of my aquamist kit.

2 gallon Tank. It's also mounted to the floor and can be easily moved to access spare tire if needed. Fold the seat and just have to push the tank in.



Outlet of the intercooler drilled and tapped. Second pic shows the jet installed.





Ecu wires. I stripped the old tape more than enough, but gave me lots of room to tap the wires properly.



Once I confirmed all the connections were leak free I installed some protective sleeves over the lines.







Have some pics showing how I routed the main feed line from the trunk to the engine bay using the fuel line route, but will upload them later.
Reply With Quote
  #7  
Old 14-04-2013, 03:52 PM
Howerton Engineering
Guest
 
Posts: n/a
Default Re: VW MK5 HFS-4 DPI install.

Very nice install. It's always good to see the final results of where all this stuff goes!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 10:36 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.