waterinjection.info  

Go Back   waterinjection.info > Injection Applications (making it work) > Gasoline Forced-Induction

Reply
 
Thread Tools Display Modes
  #1  
Old 01-04-2013, 05:09 PM
tweeqd tweeqd is offline
Junior Member
 
Join Date: Jun 2008
Posts: 8
Default How much adv with 50/50 mix

I know its proably to gerneral and will change from engine to engine
Im looking to run the dds3-v10 on my engine and tune the ign to make the most of the meth
The fail safe will switch maps in my DTA but the second map is already tuned for nitrous (not used on the road) the nos map has about 5 degrees of ign taken out of the standard map so is this going to be enough as a failsafe
As in if it takes another 5 degrees of ign with the meth is the 10 degrees retard going to be safe should i loose water/meth


Thanks martin
Reply With Quote
  #2  
Old 06-04-2013, 09:42 AM
Richard L Richard L is offline
Manufacturer sponsor
 
Join Date: Oct 2003
Location: England
Posts: 4,936
Default Re: How much adv with 50/50 mix

Can this 5 degrees be adjusted? If so, do some trial runs with a detcan.
__________________
Richard L
aquamist technical support
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT +1. The time now is 09:07 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.