waterinjection.info  

Go Back   waterinjection.info > Injection Theory (what it is and what it does) > General Effects

Reply
 
Thread Tools Display Modes
  #1  
Old 04-04-2008, 06:39 AM
Dust Dust is offline
Senior Member
 
Join Date: Mar 2007
Location: Frankfort, Kentucky
Posts: 227
Default What to use for charge cooling?

So I just bought a 660cc turbo vehicle called the Daihatsu Move.
http://www.goo-net.com/cgi-bin/goojp...e=maker_search
It?s not much in the performance department, but more for power with economy. I want to make sure that the power stays there when it?s 30 degrees Celsius and the AC is running I don?t think I need much nozzle, but I am questioning where the best place to put the nozzle would be is, and if I need a TMIC sprayer. The charts I have seen on other sites suggest .5 gph, so I was thinking that a 1 gph spraying the TMIC and a .5 after the IC would be the best way to do it. A solenoid and a momentary button to spray the IC with the pump at full power while blocking the after IC nozzle, and spraying both when activated by boost. I don?t have a way to tune the car, and don?t want anymore power, just want to keep what it has.

Questions
1. .5 Nozzle placement. Before turbo, before IC, or after IC
2. Is the intercooler sprayer worth the jet purchase?
3. What mix of water/meth?[/url]
Reply With Quote
  #2  
Old 14-04-2008, 11:43 PM
Dust Dust is offline
Senior Member
 
Join Date: Mar 2007
Location: Frankfort, Kentucky
Posts: 227
Default

anyone?
Reply With Quote
  #3  
Old 21-04-2008, 11:12 PM
keithmac keithmac is offline
Senior Member
 
Join Date: Mar 2005
Location: York / UK
Posts: 151
Default

Try after the IC first, you could spray the IC but I personally think it`s a wase of demineralised water, maybe rig a seperate system up with tap water for the ic sprayer?.

Try straight demineralised water first, then maybe a 30% methanol mix to see if it gives any improvement.

Depending on the volume you`re spraying,much more than 30% meth will have an effect on the fuel mixture/ afr that you can`t tune to compensate for.
__________________
VW Mk2 Golf 16VG60 - Mitsubishi GTO TT
Reply With Quote
  #4  
Old 26-08-2008, 07:37 AM
Dust Dust is offline
Senior Member
 
Join Date: Mar 2007
Location: Frankfort, Kentucky
Posts: 227
Default

Wanted to bring this back up. Got an elbow, and rigged up a 5gph nozzle to the TMIC shroud, and have the rear WWF pump powering it. Have a 1 gph and will be soon ordering a .5 gph nozzle. Still wondering about pre or post compressor. There is about 10 " of 2" pre turbo pipe, then from the outlet vertical to the TMIC, then a 45 degree bend and a 45 degree hose to the TB.
Reply With Quote
  #5  
Old 27-08-2008, 10:52 PM
keithmac keithmac is offline
Senior Member
 
Join Date: Mar 2005
Location: York / UK
Posts: 151
Default

I personally didn`t see much gain at all injecting pre-turbo, but other people have..
__________________
VW Mk2 Golf 16VG60 - Mitsubishi GTO TT
Reply With Quote
  #6  
Old 31-08-2008, 01:12 AM
Dust Dust is offline
Senior Member
 
Join Date: Mar 2007
Location: Frankfort, Kentucky
Posts: 227
Default

Here are some pics of the intake tract

http://img213.auctions.yahoo.co.jp/u...io2dn61194.jpg

http://img245.auctions.yahoo.co.jp/u...ubp8x67182.jpg
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 06:29 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.