waterinjection.info  

Go Back   waterinjection.info > Aquamist specific system Q and A and new products > Aquamist HFS-6 forum

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 17-02-2016, 10:57 AM
Gonzo Gonzo is offline
Junior Member
 
Join Date: Mar 2006
Posts: 3
Default HFS-6 Jet Sizing

I recently purchased a "new" (never installed) HFS-6 system, and I'm calculating the jet sizes I'll need for my setup. In doing so, I discovered that the jet sizing graph and table in both the printed and online manual are significantly different than the jet sizing graph on aquamist-direct (and Howerton Engineering, etc.).

For example, the HFS-6 manual indicates that a 0.6mm nozzle flows 352 cc/min @160psi, whereas the aquamist-direct graph indicates a 0.6mm nozzle will flow ~260cc/min.

Is the HFS-6 manual just plain wrong? I tried searching for information on this, as surely it's come up since the system was introduced in 2009, but I came up empty-handed.
__________________
Erik A.
#206/1000
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 02:14 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.